Op voorraad
- Pulse Computers
- PC's & Servers
- Notebooks & Tablets
- Opslag & Geheugen
- Interne SSD's
- Interne harde schijven
- Intern geheugen
- DDR5 DIMM value
- DDR5 DIMM performance
- DDR5 Server RDIMM
- DDR5 Server ECC UDIMM
- DDR5 SO-DIMM
- DDR5 SO-DIMM ECC
- DDR4 DIMM value
- DDR4 DIMM performance
- DDR4 Server RDIMM
- DDR4 Server LRDIMM
- DDR4 Server ECC UDIMM
- DDR4 SO-DIMM
- DDR4 SO-DIMM ECC
- DDR3 DIMM value
- DDR3 Server ECC/Regist ECC
- DDR3 SO-DIMM
- Apple (comp) geheugen
- Dell (comp) geheugen
- HP/HPE (comp) geheugen
- Lenovo (comp) geheugen
- geheugen overige merken
- Externe HDD's
- Externe behuizingen (HDD/SSD)
- Netwerkopslag
- Geheugenkaarten
- USB Sticks
- Geheugenkaartlezers
- Externe SSD's
- Componenten
- Beeld & Geluid
- Monitorkabels
- Printers & Scanners
- Randapparatuur
- Netwerk
- Netwerkkabels
- Patchkabels Cat6/Cat6a
- Patchkabels Cat6/6a 0.15m
- Patchkabels Cat6/6a 0.25m
- Patchkabels Cat6/6a 0.5m
- Patchkabels Cat6/6a 1m
- Patchkabels Cat6/6a 1.5m
- Patchkabels Cat6/6a 2m
- Patchkabels Cat6/6a 3m
- Patchkabels Cat6/6a 5m
- Patchkabels Cat6/6a 7m
- Patchkabels Cat6/6a 10m
- Patchkabels Cat6/6a 15m
- Patchkabels Cat6/6a 20m
- Patchkabels Cat6/6a 25m
- Patchkabels Cat6/6a 30m
- Patchkabels Cat5e
- Netwerkkabel op rol
- Wandmontage materiaal
- RJ45 connectors & tules
- SFP(+) kabels
- Glasvezelkabels
- Patchkabels Cat6/Cat6a
- Software & Licenties
- Computerkabels
- Supplies & Accu's
- Gereedschap
- Service & Garantie
- Speciale producten
Merken
Omschrijving
Cisco Aironet Dual-Band Omnidirectional Antenna (AIR-ANT2568VG-N) is designed for outdoor use with Cisco Aironet Outdoor Access Points (hereafter referred to as access points) with radios operating in the 2.4-GHz and 5-GHz frequency bands.
Installation Notes
The antenna is designed to connect to a dedicated antenna port on the access point. No special tools are required to install the antenna.
The antenna is resistant to the full range of outdoor environments. After the antenna is attached to the access point, seal the connections to prevent moisture and other weathering elements from affecting performance. Cisco recommends using a coax seal (such as CoaxSeal) for outdoor connections. Silicone sealant or electrical tape are not recommended for sealing outdoor connections.
Choosing a Mounting Location
The antenna is designed to create an omnidirectional broadcast pattern. To achieve this pattern, the access point should be mounted clear of any obstructions to the sides of the radiating element. If the mounting location is on the side of a building or tower, the antenna pattern is degraded on the building or tower side.
Generally, the higher an antenna is above the ground, the better it performs. A practice is to install your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and obstructions.
Tools and Equipment Required
No tools are required to mount the antenna to the access point. However, you may need a -in. (19-mm) open end or combination wrench (or adjustable wrench) to remove the antenna port covers.
For information about tools required to mount the access point, see the appropriate access point documentation.
Mounting the Antenna
To connect the antenna to the access point, follow these steps:
Step 1 If necessary, remove the antenna port cover.
Step 2 Align the antennas N connector with the appropriate antenna port.
Step 3 Gently push the antenna into the port.
Step 4 Tighten the antenna hand tight.
Installation Notes
The antenna is designed to connect to a dedicated antenna port on the access point. No special tools are required to install the antenna.
The antenna is resistant to the full range of outdoor environments. After the antenna is attached to the access point, seal the connections to prevent moisture and other weathering elements from affecting performance. Cisco recommends using a coax seal (such as CoaxSeal) for outdoor connections. Silicone sealant or electrical tape are not recommended for sealing outdoor connections.
Choosing a Mounting Location
The antenna is designed to create an omnidirectional broadcast pattern. To achieve this pattern, the access point should be mounted clear of any obstructions to the sides of the radiating element. If the mounting location is on the side of a building or tower, the antenna pattern is degraded on the building or tower side.
Generally, the higher an antenna is above the ground, the better it performs. A practice is to install your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and obstructions.
Tools and Equipment Required
No tools are required to mount the antenna to the access point. However, you may need a -in. (19-mm) open end or combination wrench (or adjustable wrench) to remove the antenna port covers.
For information about tools required to mount the access point, see the appropriate access point documentation.
Mounting the Antenna
To connect the antenna to the access point, follow these steps:
Step 1 If necessary, remove the antenna port cover.
Step 2 Align the antennas N connector with the appropriate antenna port.
Step 3 Gently push the antenna into the port.
Step 4 Tighten the antenna hand tight.
Productdetails
221960
Datasheet
- Locatie (indicatief!)
- Leverancier
- Garantie
- 3 (mnd)
- Antenne versterkingsniveau (max)
- 8 dBi
- Frequentieband
- 2400 - 2483, 5150 - 5925 GHz
- Antenne versterking (2.4 GHz)
- 6 dBi
- Antenna versterking (5 GHz)
- 8 dBi
- Impedantie
- 50 Ohm
- Soort antenne
- Omnidirectionele antenne
- Aansluiting antenne
- N-type
- Polarisatie
- Verticale polarisatie
- Internationale veiligheidscode (IP)
- IP67
- Temperatuur, in bedrijf
- -30 - 70 °C
- Temperatuur bij opslag
- -40 - 85 °C
- Hoogte
- 377 mm
- Diameter
- 3,81 cm
- Gewicht
- 204,1 g
4 andere producten in dezelfde categorie:
Artikelnummer: 268107
Merk: Ubiquiti
Ubiquiti High Efficiency Dual-Band Directional Mes
Ubiquiti UMA-D
Op voorraad
Artikelnummer: 312525
Merk: Ubiquiti
Ubiquiti airMAX GigaBeam-Plus 60GHz 5GHz 1Gbps
Ubiquiti GBE-Plus
Op voorraad
Artikelnummer: 300651
Merk: Ubiquiti
Ubiquiti airMAX GigaBeam 60GHz 5GHz 1Gbps LongRang
Ubiquiti GBE-LR
Op voorraad